Keep an eye on your vehicle's water temperature and be on the alert for possible overheating or other potential engine issues.
The sender can be mounted directly into an available water temp port (for example, inlet manifold), piggy backed off the OE sender/switch using a brass T-Adaptor or most commonly, into a top radiator hose inline t-piece. Should the standard wiring loom not be long enough, splice in an additional length of wire NO GREATER than gauge's supplied loom wire. SAAS recommends <= 20AWG wire. Use of a heavier gauge wire will provide additional resistance and distort temperature readings.
Series | Muscle Series I |
Diameter | 66mm / 2 5/8" |
Range | 40°-120° |
Lighting | LED Multi-select 4 Colour |
Type | Electronic |
Bracket Mounting | SG31005 |
Water Temp Sender | SG31001 |
Sender Thread | 1/8" NPT |
Sender Adaptors | Brass Adaptors |
Wiring Loom | SG3120 |
Download | Fitting Instructions |
SKU | SG-WT258B |
Barcode | 9348391007415 |
Length | 150mm |
Width | 125mm |
Height | 95mm |
Cubic | 0.0018m³ |
Weight | 0.40kg |